Influence of fatty acid composition on chemical changes in blends of sunflower oils during thermoxidation and frying

The influence of fatty acid composition on formation of new compounds at frying temperatures has been studied in seven samples of sunflower oils widely differing in their fatty acid composition. Thermal oxidation assays as well as frying experiments were carried out and samples were evaluated by measuring the new compounds formed, i.e. polymers, polar compounds and their distribution by molecular weight, and polar fatty acids and their distribution by molecular weight. The levels of all the new compounds analysed strongly depended on the degree of oil unsaturation; the two least unsaturated oils with low content of linoleic acid and high content of palmitic acid behaved exceptionally well. When considering polar compounds or polar fatty acids, the polymers/oxidised monomers ratio increased significantly as the level of degradation increased. The new compounds formed are practically identical when analysed in the used frying oils or in the lipids extracted from the counterpart fried potatoes, independently of the level of degradation.     

Star-shaped hexaaryltriindoles small molecules: Tuning molecular properties towards solution processed organic light emitting devices

We present a series of differently substituted star-shaped hexaaryltriindoles with tunable light-emitting properties. The deep blue emission is unchanged by donor peripheral substituents while an increasing acceptor character produces a reduction of the optical gap, an increased Stokes shift and eventually leads to the appearance of a new electronic level and to the simultaneous deep blue (413 nm) and green (552 nm) emission in solution. Quenching by concentration increases with the acceptor character but is lower as the tendency of these compounds to aggregate is stronger. Solution processed thin films present optical and morphological qualities adequate for device fabrication and similar electronic structure compared to solutions with an emission range from 423 nm up to 657 nm (red), demonstrating the possibility of tuning the energy levels by chemical functionalization. We have fabricated and characterized single-layer solution processed organic light emitting diodes (OLED) to investigate the influence on transport and emission properties of the substituting species. We analyzed the I–V response using a single-carrier numerical model that includes injection barriers and non-uniform electric-field across the layer. As a result, we obtained the electric field dependence of the mobility for each device. Best results are obtained on the most electron rich derivative functionalized with six donor methoxy groups. This material shows the highest emission efficiency in solid state, due to aggregation-induced enhancement, and better transport properties with the highest mobility and a very low turn-on voltage of 2.8 V. The solution processed OLED devices produce stable deep blue (CIE coordinates (0.16, 0.16)) to white (CIE coordinates (0.33, 0.3)) emission with similar luminous efficiencies.     

Antioxidant and antimicrobial activity and potential of heather (Erica spp.) extracts in the control of Listeria monocytogenes

In this work, heather and its flowers were studied regarding their antioxidant and antimicrobial activities. Plants were subjected to ultrasound-assisted methanolic extraction followed by fractionation. A phytochemical characterisation of extracts content in total phenols and flavonoids, and their antioxidant activity was performed. The antimicrobial activity was evaluated through the determination of minimum inhibitory concentration and by bioautography. Following, studies on the antilisterial potential were carried out by: time-kill curves, inhibition of biofilm formation and tolerance of Listeria monocytogenes to adverse conditions. The results evidenced the antioxidant activity in both extracts, as well as, the antimicrobial activity against Gram-positive bacteria. Concerning the evaluation of the antilisterial potential, a bacteriostatic behaviour and inhibition of biofilms formation ability were observed. Listeria monocytogenes showed an increased susceptibility to adverse conditions when preincubated with extracts. Thus, heather and its flowers may be a source of new compounds with antilisterial activity potential.     

A good practice for making training accessible to university faculty members through ICTs: syllabus planning support training

Universal Access in the Information Society - This study focuses on a case study developed at a higher education institution, which comprises developing a new virtual teaching unit (VTU) aimed at...     

Synthesis and Properties of Fumaric Copolymers as Potential Bitumen Modifiers

New copolymers of dioctyl fumarate (DOF) and styrene (S) were synthetized by radical polymerization and used to modify bitumen. The poly(dioctyl fumarate-co-styrene) copolymers, PFS, were characterized by ¹H-NMR and FTIR spectroscopies and size exclusion chromatography (SEC) in order to determine their monomer composition and weight average molecular weights, respectively. The polymer-bitumen blending conditions were optimized and the samples analyzed by different methodologies. Fluorescence microscopy, rotational viscosity and differential scanning calorimetry (DSC) were used to study the morphological changes of blends during their manufacturing and the rheological and thermal behavior, respectively. All modified bitumen (MB) exhibited higher viscosity than the based bitumen (BB) under studied conditions and this effect was more evident for the MB containing the higher molecular weight polymer. The addition of polymers to BB enhances the bitumen viscosity and thus increased the energy required for the flowing (activation energy calculated by Arrhenius equation). Thermal and morphological analysis showed that all MB exhibited good polymer- bitumen compatibility, which could be consider as a good starting point for a potential applications of this new material in road engineering.     

Comparison of machine learning algorithms for optimization and improvement of process quality in conventional metallic materials

This paper presents a particular problem dealing with the apparition of burr during the drilling process in the aeronautic industry. This burr cannot exceed a height limit of 127?μm as set out by the aeronautical guidelines and must be eliminated before riveting. If this is not performed, it can cause structural damage which would constitute a danger due to the lack of safety. Moreover, the industry needs to find an automated and optimised process in which the drilling and deburring can be carried out in real time, eliminating those other unnecessary tasks, in order to obtain high-quality pieces. The work presents the applicability of data mining and machine learning techniques so as to obtain a real time burr detection model. This model could be implanted in the computer numerical control of the machine allowing the whole process to be automated and optimised. These techniques can be applied to other types of processes.     

Socially-Aware Multimedia Dissemination in Personal Mobile Networks

Wireless Personal Communications - Mobile multimedia entertainment is pervasive on mobile devices, leading people to access, store and disseminate a diversity of multimedia contents anytime and...     

Diacetylene-containing polymers. XI. Synthesis and characterization of poly(hexa-2,4-diynylene-1,6-dioxydibenzoate) and poly(octa-3,5-diynylene-1,8-dicarboxylate) containing p-nitroaniline groups

Summary Two novel polymers containing p-nitroaniline group in the side chain and diacetylene groups in the main chain, were synthesized, and characterized. The polymers gave films of excellent optical quality by spin coating from DMF or chloroform. The one containing benzoate had a T_g of 103°C and its thermal cross-linking through the diacetylene group started at around 160°C. The one containing pentynoate had a T_g of 35°C and its cross-linking started at around 120°C. It was shown that thermosetting resins with functional groups could be obtained by using diacetylene-containing polymers. Although these two polymers have a same polar dye molecule, the second order nonlinear optical property was so different, showing that the main chains are very important for nonlinear optical property. Irradiation of UV light converted the polymer films to completely insoluble thermoset resins. Received: 13 February 2001/Revised version: 25 July 2001/Accepted: 30 July 2001     

Updated safety analysis of ITER

An updated version of the ITER Preliminary Safety Report has been produced and submitted to the licensing authorities. It is revised and expanded in response to requests from the authorities after their review of an earlier version in 2008, to reflect enhancements in ITER safety provisions through design changes, to incorporate new and improved safety analyses and to take into account other ITER design evolution. The updated analyses show that changes to the Tokamak cooling water system design have enhanced confinement and reduced potential radiological releases as well as removing decay heat with very high reliability. New and updated accident scenario analyses, together with fire and explosion risk analyses, have shown that design provisions are sufficient to minimize the likelihood of accidents and reduce potential consequences to a very low level. Taken together, the improvements provided a stronger demonstration of the very good safety performance of the ITER design.